| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Mount Extra Pot Strat http://www-.luthiersforum.com/forum/viewtopic.php?f=10123&t=56207 |
Page 1 of 1 |
| Author: | msromike [ Fri Jan 12, 2024 10:51 am ] |
| Post subject: | Mount Extra Pot Strat |
Hi, I want to add a Fishman Powerchip to a Stratocaster. I don't have a drill press. My idea was to use a very thin drill to drill completely through the body to locate the top and bottom hole. Then from the bottom use a Forstner bit to create the cavity leaving enough wood for the shaft top and bottom nuts to sandwich. Then from the top drill the 3/8 inch hole into the cavity. Am I on the right track? and would you attempt this without a drill press? I have searched the Internet quite a bit and "adding pot to solid body guitar" yields nothing useful. Michael Attachment: FENDER-STRAT-PETE-TOWNSHEND-2484.resize.jpg Attachment: R.resize.jpg
|
|
| Author: | dofthesea [ Fri Jan 12, 2024 11:52 am ] |
| Post subject: | Re: Mount Extra Pot Strat |
I would recommend not doing this. Find a custom pot setup without drilling out the guitar that works. |
|
| Author: | Hesh [ Fri Jan 12, 2024 12:37 pm ] |
| Post subject: | Re: Mount Extra Pot Strat |
dofthesea wrote: I would recommend not doing this. Find a custom pot setup without drilling out the guitar that works. I agree with David and I make my living drilling out guitars but where we do no harm. Do it in the pick guard region so it's reversible with a new guard when the power chip goes tits up long before the instrument does. Welcome to the form Michael |
|
| Author: | Smylight [ Fri Jan 12, 2024 8:37 pm ] |
| Post subject: | Re: Mount Extra Pot Strat |
I suppose the OP wants to emulate Pete Townshend's setup. In which case he'd have to make a router template to guide the cavity on the back. But I agree, I'd rather choose to keep the body unharmed and route under the pickguard when I have no other choice. Well, that's what I usually do anyway. Pierre Guitares Torvisse |
|
| Author: | CraigG [ Sat Jan 13, 2024 9:19 am ] |
| Post subject: | Re: Mount Extra Pot Strat |
I would change to a single master tone and put the pit for the power chip in the 3d hole |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|